Home > Desktop User > Debian Installer

Debian Installer

A Slight Flaw with the Debian Installer

A few weeks ago, I noticed some really good e-Bay deals on used, Opteron-based servers. I mean, they were going for less money than I had to pay for old Pentium III-based servers just three years ago. So, I decided that maybe it was time to upgrade.

Three of the four machines that I bought were Sun Sunfires, each with a pair of single-core 2.4 Gigahertz Opterons and a pair of hot-swappable SCSI hard drives. Since the drives are rather smallish, I figured I’d just combine each pair into one large logical volume.

On the first machine, I installed Fedora 11. When I got to the hard drive setup page, I chose to go with the default Logical Volume Manager setup. The installer then asked me how many drives that I would like to use for the Fedora installation. I chose both drives, and both were automatically added to the logical volume. No muss, no fuss, and everything worked fine. This is typical of the Red Hat-type installers.

On the next machine, I decided to install Debian 5.0. Again, I decided that I wanted to combine both drives into one large logical volume. When I got to the hard drive setup page, I chose the “Guided” option for setting up the LVM. The next page asked me which drive I’d like to use for the installation. I wanted to choose both drives, but Debian doesn’t provide that option. So, I backed out, and decided to use the “Manual” option for setting up the hard drives myself. That didn’t work either, because the “Guided” option had already created the LVM volume group. (That happened, even though I hadn’t been asked to confirm whether to write changes to the hard drive.) So, I backed out again, and choose to open a command-line session. I then used the LVM tools to delete the volume group and physical volumes. I then decided to go “old-school”, and try setting things up with fdisk and the command-line LVM tools. That way, I could get both drives added to the logical volume and continue the installation.

Only one problem. . .

When I finished, I went back to the hard drive setup page, thinking that my new, manually-configured setup would be recognized, and I’d be good-to-go.

Wrong. . .

Instead, my configuration got wiped out, and I ended up with the original single-drive setup.

Okay, no problem. I figured that I’d just continue the installation, and add the second drive to the logical volume later.

Wrong, again. . .

When the installation completed and I tried to boot from the hard drive, I got an error message about how the logical volume couldn’t be found. Apparently, the LVM metadata got messed up when the installer replaced my manual configuration. So, not wanting to waste any more time on this machine, I grabbed my Fedora 11 CD and installed it, instead. Again, no muss, no fuss. It automatically deleted my mess-ups and created the two-drive logical volume.

On the final machine, I gave Debian another try. This time, I just accepted the default single-drive logical volume, and continued the installation. After the installation completed and I had it booted from the hard drive for the first time, I added the second drive to the logical volume. I didn’t want to mess around trying to learn any graphical LVM utilities, so I just did everything “old-school”. (That is, I used fdisk, the command-line LVM tools, and the command-line filesystem resize tool.) Finally, I did a quick “df -h” to verify that the logical volume was resized correctly.

Conclusion

To be fair, I’m sure that Debian isn’t the only distro that has this kind of installer deficiency. And granted, for an experienced Linux user, it’s no huge deal to add a hard drive to the logical volume after the Debian installation has completed. Still though, you have to wonder. . .

If Red Hat can create an installer with an easy-to-use LVM setup, why can’t everyone else?

About these ads
Categories: Desktop User
  1. Debianero Rumbero
    February 21, 2010 at 1:36 am

    Have you fill a bug report?

    http://bugs.debian.org/

  2. Joe
    February 21, 2010 at 2:02 pm

    Interesting note, but why blend 2 drives like that anyway? Hard drive space is so cheap these days, and combining 2 drives like that effectively doubles your risk for losing all the data on either drive.

  3. the Hulk
    February 21, 2010 at 5:37 pm

    I also had problems with the LVM set up on two drives. I spent way too much time on it. I just did it on one drive then had to add the second.

    Another problem is that it gave my 8GB machine 24GB of swap and I cannot change it.
    I don’t need 24GB of swap.

  4. Debianero Rumbero
    February 21, 2010 at 7:01 pm

    Debian Installer 6.0 Alpha1 release.

    P.S. DI Team is looking for people willing to help the project.

  5. February 22, 2010 at 10:36 am

    I would second that, file a bug report or this stuff goes unnoticed some times.

  1. No trackbacks yet.

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s

Follow

Get every new post delivered to your Inbox.

Join 55 other followers

%d bloggers like this: